Combustion and Thermal Parts Platform

Parameter introduction：
Power range: 3~20kw; 10~40KW; 30 to 52KW
Fuel type: Natural gas, city gas, liquefied gas, purified converter gas, purified producer gas.
Adjustment ratio: 1:4
Working gas pressure: 3~20KPa (up to 30KPa)
Factory default setting: Natural gas, pressure 8KPa
Maximum ambient temperature of gun head: 01G type 1100°C; Type 01E 1200℃.
Gas pipe connection: 3/8"~1/2 "steel pipe or stainless steel hose
Protection level: IP20
Ignition mode: high energy ignition/electrode ignition (according to user requirements).
flame detection: with the fire detection signal of the main burner, electrode ignition, ignition and fire detection shared electrode way.
Barrel outer diameter: 48mm~76mm
Material of gun head :310S
Length: 300~2000mm, according to user requirements.
Use environment: The gun body should be placed in an air environment or air passage
Use: Used for ignition and flame protection of burner, ignition of burner under high negative pressure furnace working environment.
Note: Not suitable for ignition fuel gas with H2 content higher than 30%.
          L1 is customized according to user requirements

Q: The removal and installation of the ignition electrode is inconvenient (except for the high-energy ignition rod).

A:

1.For damaged electrodes, first use a tool to break off the bent part of the electrode head, and then unscrew from the tail end of the electrode；

2.When customizing new electrodes, pay attention to customizing straight rod types first. During installation, first heat the metal wire on the electrode head with a flame until it becomes red-hot, then quickly insert the electrode into the installation section and rotate it into position. Finally, bend the electrode head and adjust the spark gap.

Q:The flame of the ignition torch is weak, turns red in color, and appears to be unstable.

A：Increase gas pressure

Spare parts list for RQ-YS01