Combustion and Thermal Parts Platform

Tecflame Gas Burner is a high-precision temperature control burner designed by DYDTEC for medium and high temperature industrial applications. Tecflame is a nozzle mixing burner with the characteristics of high flame velocity， ultra wide power regulation range， sufficient and stable combustion and high heat transfer efficiency. It is widely used， such as ceramic shuttle kiln， glass tempering furnace， tempering furnace， quenching furnace， annealing furnace， RTO， thermal oxidation furnace， drying furnace， preheating furnace， etc. 

Capacity range: 105kw-5300kw ;

Regulation ratio: 50:1 ;

Applicable maximum combustion chamber temperature 1540°C ;

Maximum flame velocity 150m/s ;

Preheating combustion air can be used ;

Low CO and NOx emissions ;

Direct ignition with spark plug ;

Applicable to natural gas and LPG.

Its temperature is even so the performance is excellent and flame is shorter.

Click to view：Tecflame Burner

Hazardous waste incineration application system

Application of sludge pyrolysis system

Application of sludge incineration and drying system

Q:What are the gas pressure parameters and flow rate when TECFG is used as LPG fuel?

A：

Q:Can we turn the air and gas inlet?

A:According to our technican, you can turn the air and gas inlet. please pay attention to the gasket and not to damage it.BTW, next time you can inform us while ordering, we can install the burners as you required.

Q:Will the capacity be the same with preheated air?

A:Yes， the capacity will be the same.

Q:What air pressure (hot) will I need at the burner?

A:Preheating combustion air requires higher air pressure, which is calculated according to the formula. P(hot air)=（273+200）/273